LaserCyber L1 Pro on Kickstarter: 1200W Laser Welding, Cutting and Cleaning in One System
- Jonathan
- 6 hours ago
- 8 min read
A workshop that pairs welding with automated CNC cutting normally has to manage separate equipment, controls and setup. The LaserCyber L1 Pro on Kickstarter mounts the same 1200W laser head onto a CNC arm instead, so cutting becomes a setting change rather than a separate purchase.
The campaign has raised $718,683 against a $12,755 goal from 175 backers, with 38 days left on Kickstarter. LaserCyber was co-founded by a team from Han's Laser and Alibaba, joining industrial laser manufacturing experience with software engineering.
Quick Verdict
Our verdict: 8.8/10
Who Is It For?
The LaserCyber L1 Pro is built for home workshop welders who want to add CNC cutting without buying a second machine, and for hobbyists working in aluminum and brass who have struggled with reflective-metal instability on lower-power lasers. It also suits beginners who want factory presets over a manual parameter chart, without shutting out welders who prefer full manual control.
Main Strengths
The LaserCyber L1 Pro on Kickstarter welds, cuts, cleans and feeds wire through one 1200W head, which the company prices at $7,299 for the full CNC combo against a stated $32,199 for equivalent separate machines.
The AI Vision Welding Gun records every weld through a built-in 1080p camera and flags lens contamination early, with LaserCyber's app recommending parameter changes from the footage.
The C1 InterLinked CNC cuts at up to 1000mm/s with ±0.05mm accuracy using the same welding gun, so switching to CNC cutting takes seconds, not a second setup.
LaserCyber states the L1 Pro welds reflective metals like aluminum and brass with stable results, a class it says causes problems for traditional welding and lower-power lasers.
Fast Mode ships with 366+ presets for a four-step start, while Engineer Mode hands experienced welders full manual control, so one LaserCyber Welder serves both skill levels.
Main Limitations
This is LaserCyber's first Kickstarter campaign under this account, and mass production is not scheduled to begin until November 2026.
Consumable parts like protective lenses, nozzles and gloves are excluded from the two-year warranty unless they arrive defective.
The L1 Pro carries a Class 4 laser safety rating, which calls for eye protection and controlled conditions rather than casual, unsupervised home use.
Is the LaserCyber L1 Pro Worth Backing?
LaserCyber L1 Pro is worth backing for anyone paying for a welder and a CNC cutter as two separate purchases, since the CNC add-on covers both. Buyers who want a shipped track record should wait, since this is LaserCyber's first Kickstarter project despite its founders' stated prior campaign experience. Between the built-in wire feeder, the AI vision camera, and stable performance on reflective metals, the LaserCyber L1 Pro on Kickstarter earns its place over buying a welder and a cutter separately.
LaserCyber L1 Pro Price on Kickstarter
The $3,999 LaserCyber L1 Pro Super Early Bird tier is the one to plan around: 44% off the $7,099 MSRP, with the 1200W welder, built-in wire feeder, AI vision camera and full accessory kit included. Buyers who also want CNC cutting should take the $7,299 combo instead, 48% off a $14,099 MSRP and the only tier bundling the CNC unit. The $1,799 LaserCyber L1 Air trades power for price at 40% off $2,999, capped at 600W and 2.5mm, and every LaserCyber Welder tier ships with the same goggles, gloves and lens kit.
Against the campaign's own multiple-machine comparison, the L1 Pro and C1 CNC combo asks for a fraction of the cost of separate welding, cutting and cleaning hardware while also including LaserCyber's integrated AI weld camera. On the campaign's own pricing, the combo is the stronger value for buyers who genuinely need both welding and automated cutting. The LaserCyber L1 Pro on Kickstarter starts at $3,999
What Is the LaserCyber L1 Pro and What Problem Does It Solve?
LaserCyber L1 Pro: 1200W Fiber Laser Welding, Cutting and Cleaning in One System
The LaserCyber L1 Pro is a fiber laser system that welds, cuts, and cleans metal through one head instead of three separate machines. A built-in wire feeder retracts automatically at the end of each weld, and the same welding gun mounts onto the optional C1 InterLinked CNC for automated cutting. LaserCyber rates the system at 1200W with 40% electro-optical conversion efficiency, handling material from 0.2mm up to 4mm thick.
The lens stack supports stainless steel, aluminum alloys, carbon steel, brass, copper, titanium and nickel-based alloys, with the L1 Pro sitting above the LaserCyber L1 at 900W and the L1 Air at 600W on power and thickness ceiling. The included cleaning lens widens the cleaning pass to 100mm, which LaserCyber rates at up to 16 times the efficiency of manual cleaning. LaserCyber lists CE, FDA, FC and SGS certifications for the line, and says its leadership previously delivered a $5 million single-campaign Kickstarter launch before this one.
Why Metal Fabrication Workshops Still Rely on Multiple Separate Machines
A separate wire feeder is standard on most traditional welders, and pairing that welder with a CNC cutter adds a second machine, a second set of controls, and a steeper learning curve on top. LaserCyber's own campaign material adds that achieving consistent results with traditional methods often takes repeated parameter adjustments and considerable operator experience.
LaserCyber's answer is to route both jobs through the same 1200W laser source: the welding gun mounts directly onto the C1 InterLinked CNC, switching from welding to CNC cutting in seconds rather than a second setup. LaserCyber frames the integration as a cost decision as much as a workflow one, pricing the combined system well below its own estimate for equivalent separate welding and cutting hardware.
LaserCyber L1 Pro Key Features and Specs: AI Vision Welding, CNC Cutting, Reflective Metals, and Preset Control
1200W Power and a Built-In Wire Feeder: One Machine Instead of Three
Every LaserCyber Welder in the L1 series builds the wire feeder into the welding gun rather than selling it separately, which the company says cuts setup time by 90% against an external feeder, and retracts the wire automatically at the end of each weld.
At 1200W and a 1080 ± 10nm wavelength, the L1 Pro processes 0.2mm to 4mm material, wider than the 900W LaserCyber L1 (3mm) or the 600W L1 Air (2.5mm). At full load the L1 Pro draws up to 4400W (19.1A), which can exceed a standard household circuit. The interface runs two operating modes, covered below, which LaserCyber calls the industry's first modern interface of its kind.
The AI Vision Welding Gun: Recorded Welds and Automatic Lens Checks
A 1080p camera built into the LaserCyber L1 Pro on Kickstarter's welding gun records every weld, which LaserCyber calls the industry's first AI welding gun of its kind. Sessions upload to the LaserCyber app, where the company says AI reviews the footage and recommends parameter changes.
The same camera checks the lens for contamination before welding starts, which LaserCyber says cuts the guesswork out of manual inspection. Over time it builds a personal weld library a welder can return to when a similar join comes up again.
C1 InterLinked CNC: 0.05mm Cutting Accuracy From the Same Laser Head
The optional CNC mounts the same welding gun onto an automated arm, turning the 1200W source into a cutter without a second laser. LaserCyber rates the cuts at up to 1000mm/s with ±0.05mm accuracy on material up to 4mm thick, matching the L1 Pro's own ceiling.
Frog Jump technology, LaserCyber's term for cutting travel time between passes, works with power control to shorten cycles across a 600 by 400mm area. The unit weighs 57.6kg with an 884 by 836mm footprint.
Reflective Metal Welding: Stable Results on Aluminum and Brass
LaserCyber says the L1 Pro holds a stable weld on highly reflective metals like aluminum and brass, an advantage the company says traditional welding and lower-power laser systems lack.
The supported list also covers stainless steel, carbon steel, galvanized steel, titanium and nickel-based alloys, plus dissimilar-metal joins. LaserCyber pairs that reflective-metal claim with the same 1200W source and 40% stated electro-optical conversion efficiency, but does not specify a separate reflective-metal mode.
Fast Mode and Engineer Mode: 366+ Presets Versus Full Manual Control
Fast Mode gets a new welder to a first weld in four steps, drawing on 366+ preset parameters LaserCyber expands through OTA updates, intended to reduce initial parameter setup.
Engineer Mode removes those guardrails and hands over every parameter, for welders who already know what a joint and material need. LaserCyber presents the two-mode interface as an alternative to the more complex controls in its own campaign comparison.
L1 Air, L1, and L1 Pro: Choosing a Power Level and Bundle
The 600W L1 Air tops out at 2.5mm and is the lightest of the three at 23kg, suited to thinner sheet work, though LaserCyber does not list the AI vision camera for this model. The 900W LaserCyber L1 steps up to 3mm and 30kg, adding the AI camera for workshops that outgrew hobby-scale welding.
The 1200W L1 Pro tops the range at 4mm and 36.3kg, keeping the AI camera and the highest thickness ceiling of the three. All three share the same supported metals, welding modes and wire feeder, and all three can pair with the C1 InterLinked CNC, so the real choice comes down to thickness and the camera: skip the L1 Air if the AI camera matters, and choose between the L1 and L1 Pro based on whether 3mm or the full 4mm ceiling covers the work.
Should You Back the LaserCyber L1 Pro on Kickstarter?
LaserCyber is positioning the L1 Pro as the machine that replaces a small workshop's separate welder and CNC cutter.
For a workshop currently running a TIG welder alongside a separate CNC cutter, combining both removes an entire second machine and its own set of controls from the shop floor. LaserCyber's own comparison puts the combo tier at a fraction of a stated $32,199 for equivalent separate hardware, and the company rates the combined workflow at 10 times the cutting speed of TIG welding with half the rework, citing a 3.5-day turnaround against 20 days for buyers running a separate CNC cutter and welder. Hobbyists who have fought reflective-metal instability on cheaper lasers get a system LaserCyber says holds a stable weld on aluminum and brass specifically, rather than one tuned only for steel.
LaserCyber has mass production scheduled for November 2026, with first shipments the following month, backed by lab testing the company describes as covering weld tensile strength, thermal stability and multi-material samples. At $3,999 against a $7,099 MSRP for the L1 Pro alone, the LaserCyber L1 Pro on Kickstarter is currently funding with 39 days remaining.
FAQ about the LaserCyber L1 Pro on Kickstarter
Do LaserCyber's AI welding features require a subscription?
No. LaserCyber says Kickstarter backers get lifetime access to the app and its AI features, including weld analysis and lens checks, at no extra cost. Future buyers through its website or other channels may see different terms.
Is the LaserCyber app compatible with iOS and Android?
Yes. LaserCyber says the app will be compatible with both Apple iOS and Android devices, so backers are not tied to one mobile platform to use the AI features.
How long is the LaserCyber L1 Pro covered under warranty?
LaserCyber covers core components (screen, PCB, camera, power switch, fans and electronics) for two years across the welder and the CNC unit, plus one free laser module replacement. Consumables like lenses, nozzles and gloves are excluded unless defective on arrival.
Can the C1 InterLinked CNC cut without the L1 Pro welding gun mounted?
No. The CNC has no laser source of its own. It uses the L1 Pro's, L1's or L1 Air's welding gun, mounted onto its automated arm, to cut at up to 1000mm/s with ±0.05mm accuracy.
Can I add the C1 InterLinked CNC to an L1 Pro I already own?
Yes. LaserCyber lists it as a standalone add-on at $3,500, 50% off a stated $7,000 MSRP, for backers who choose a solo tier and want CNC cutting later.
Does LaserCyber ship worldwide, and who pays for shipping?
LaserCyber, also written Laser Cyber Kickstarter in some search listings, says it ships to most regions worldwide, with remote areas excluded or requiring extra fees. Shipping runs roughly $200 to $700, collected after the campaign through a survey.
About the Author
Jonathan
Crowdfunding Strategist & Analyst at GizmoCrowd
Jonathan is Co-Founder of GizmoCrowd and a crowdfunding strategist with over 15 years of hands-on campaign experience on Kickstarter and Indiegogo.
Read more...
.png)
