top of page

AXILOOP MC8 on Kickstarter: Multi-Color 3D Printer With 8 Independent Tool Heads

Writer: Jonathan
Jonathan
4 minutes ago
7 min read
AXILOOP MC8 multi-color 3D printer on a workbench with multiple filament spools feeding its independent tool heads.

On a printer that feeds every color through one nozzle, each color change costs filament, and the cost piles up in a purge tower beside the model. The AXILOOP MC8 takes the swap out of the nozzle: it is a multi-color 3D printer with eight independent tool heads, each loaded with its own filament.


AXILOOP brings it to Kickstarter as the 3D printing division of Xike Industrial, a subsidiary of Zesum Technology, which is listed in Shenzhen under stock code 301486. The printer made its public debut at the Formnext Asia trade show in late August 2026. The AXILOOP MC8 price on Kickstarter is $1,099 for Super Early Bird backers.


When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.


🚀 AXILOOP MC8 campaign on Kickstarter until late December 2026

📈 At launch: $642,101 raised from 429 backers, goal $49,990

💰 Super Early Bird tiers: MC8 $1,099 (limited to 400), MC8 Pro $1,499 (limited to 300), MC8 Pro Bundle $1,639 (limited to 300)

📦 Delivery: estimated March 2027



Quick Verdict


Our verdict: 8.5/10


Who Is It For?


This multi-color 3D printer is built for home makers who print colorful figures and collectibles, and for small print farms running batch jobs. Designers who combine several materials in one prototype are another fit.


Main Strengths


  • Eight heads stay loaded with their own filament, so a color or material change needs no purge tower.

  • A tool change takes 4 seconds with preheated heads, so the print does not stall waiting for a nozzle.

  • Bed leveling and the alignment of all eight nozzles are automatic, with no manual offset tuning.

  • The 300 x 300 x 300 mm build volume takes large models in one piece or a full plate of parts.

  • Local support teams in the US, the UK, Germany and France back up worldwide online help.


Main Limitations


  • This is AXILOOP's first Kickstarter campaign, and its plan leaves three months between the start of mass production in December 2026 and the first shipments in March 2027.

  • The nozzles are AXILOOP's own proprietary design, and hotend parts carry only a three-month warranty.

  • The open-frame MC8 prints PLA, PETG, TPU and PVA only, so ABS, ASA, PA, PC and fiber-reinforced filaments require the enclosed Pro.


Is the AXILOOP MC8 Worth Backing?


The AXILOOP MC8 is worth backing for the makers and small farms above, whose prints change colors or materials many times per job. Anyone who prints mostly in one color can pass: they would rarely use eight heads. The deciding reason is the eight independent tool heads, which replace purging with a swap: the AXILOOP MC8 on Kickstarter.




AXILOOP MC8 Price on Kickstarter


The AXILOOP MC8 price on Kickstarter is $1,099 for Super Early Bird backers, limited to 400 units, against a $1,499 MSRP. The AXILOOP MC8 Pro is $1,499 in its Super Early Bird tier, limited to 300 (MSRP $1,999). The tier we recommend is the Super Early Bird MC8 Pro Bundle at $1,639, also limited to 300: it adds a set of eight printheads, the Cold Build Plate and 8 kg of filament to the Pro.


Bought as add-ons, those three items would cost about $250, so the bundle saves about $110 over the Pro plus extras and arrives with filament and a spare printhead for every tool head. For buyers who would order filament and spare nozzles anyway, the bundle is a stronger value than the Pro alone and keeps the Pro's wider material list. Our 3D printer reviews cover the other options, and the MC8 Pro Bundle is $1,639 on Kickstarter .



What Is the AXILOOP MC8 and What Problem Does It Solve?


AXILOOP MC8: An Eight-Head Multi-Color 3D Printer in Two Editions


The AXILOOP MC8 is a desktop filament printer that carries eight complete tool heads, each with a hardened steel nozzle rated to 320°C. Its build plate is PEI-coated flexible steel, heated to 110°C. Two editions share the platform: the open-frame MC8 and the fully enclosed MC8 Pro.


The MC8 measures 466 x 553 x 541 mm and draws 1,200W; with its enclosure and glass door, the Pro rises to 871 mm and draws 2,200W. Both carry a 4-inch touchscreen, Wi-Fi, USB and 16GB of storage. Behind the AXILOOP 3D printer line are Xike Industrial's decade of manufacturing and more than 300 patents, and a CTO, Murphy Xu, with 12 years in 3D printing.


Why Changing Colors Became the Slowest Part of a 3D Print


The model is sliced, and the printer still spends minutes purging and heating before the next color can start. On a print with many colors, those pauses and the purged plastic add up, job after job.


On the MC8, the next color is already loaded and warm, so the print carries on within seconds and the filament you paid for ends up in the model.



AXILOOP MC8 Key Features and Specs: Tool Heads, Calibration, MC8 vs Pro, Monitoring


AXILOOP MC8 and AXILOOP MC8 Pro multi-color 3D printers shown side by side, with the enclosed Pro printing a model.

8 Tool Heads and 4-Second Changes: Color Swaps Without Purging


Each of the eight heads has its own hotend and nozzle, so no two colors share a nozzle. AXILOOP calls this no-wipe alignment and puts purge waste at close to zero, since a swap means setting one head down and picking up the next. Our review of the Lightmake L4 covers the same approach with four independent print heads; the MC8 doubles the count.


The changeover takes 4 seconds, and nozzle preheating brings the next head to temperature before it is called. Each hotend reaches a maximum flow rate of 34 mm³/s, and the standard 0.4 mm nozzle can be swapped for 0.2, 0.6 or 0.8 mm sizes, sold as add-on kits of eight at $91.


2,500-Point Eddy Current Leveling: Eight Nozzles on One Line


Eight nozzles only work if they all lay filament in the same place. The MC8 calibrates the XYZ offset of every tool automatically, and AXILOOP rates the alignment within 0.03 mm. Before a print, an eddy current sensor maps the plate at 2,500 points in about a minute, for a reliable first layer.


The motion system pairs an X-axis guide rail with a maximum printing speed of 300 mm/s, a maximum extruder moving speed of 600 mm/s and acceleration up to 25,000 mm/s², a rail the brand rates as steady at speed, without ringing. Vibration compensation, pressure advance and factory pre-calibrated flow profiles come on both editions.


MC8 vs MC8 Pro: A 65°C Chamber for Engineering Filaments


The two editions share the heads, the build volume and the motion; the difference is the box around them. The Pro adds an enclosed chamber with a glass door, active heating to 65°C, air recirculation and built-in HEPA and carbon filters. Reduced operating noise is listed for the Pro, with no decibel figure published.


That chamber opens the Pro to PET, ABS, ASA, PA, PC and fiber-reinforced polymers, on top of the four filaments the standard MC8 prints, so the choice comes down to materials. A buyer who plans to print ABS or fiber-filled filaments needs the AXILOOP MC8 Pro; one who stays with PLA and PETG gives up the enclosure, its filtration and the quieter running by taking the standard model, for $400 less at Super Early Bird prices.


45 Sensors and an AI Camera: Monitoring and Remote Control


Forty-five sensors cover tool changes, filament flow, temperature and safety, alongside an AI camera that watches the job in real time. Detection covers spaghetti failures, foreign objects and plate placement on the bed, tool head pick-and-place errors, filament runout and jams, and nozzle starvation. The campaign gives no detection rate for the AI.


Filament loads and unloads with one tap. The phone app streams the 1080p camera and handles remote start and pause, temperature, tool head movement, chamber lighting and a sleep mode between runs.



Should You Back the AXILOOP MC8 on Kickstarter?


The AXILOOP MC8 is a large-format multi-color 3D printer for people who print often and in several colors at once. Think of a shelf of collectibles printed in every color, or a job started from the office and checked from the couch on the phone app.


The AXILOOP 3D printer went through a small-batch production run in July 2026. At $1,099 for the Super Early Bird, 27% under its MSRP, the standard model is the entry point, and the Pro Bundle is the tier to take for the full kit: the AXILOOP MC8 is on Kickstarter .



FAQ about the AXILOOP MC8 on Kickstarter

Which slicer does the AXILOOP MC8 use?

The AXILOOP MC8 has no proprietary slicer. It officially supports OrcaSlicer, through a self-maintained fork. The printer runs AXILOOP's own system built on open-source firmware, which the company plans to open-source later.

Only the AXILOOP MC8 Pro does: its heated chamber supports carbon and glass fiber reinforced polymers out of the box, along with PET, ABS, ASA, PA and PC. The standard MC8 is not designed for fiber-filled filaments and prints PLA, PETG, TPU and PVA. More filament types are still under testing.

The AXILOOP 3D printer uses self-developed nozzles with hardened steel tips, 0.4 mm as standard, with 0.2, 0.6 and 0.8 mm sizes. The hotend has a quick-release design: the whole heating assembly comes out by removing three screws, with no complex tools.

Both editions carry a one-year warranty, with technical support throughout. The nozzle, heat break, silicone sock, extruder gears and PEI plate count as consumables, covered for three months. A one-year extension for the main unit is a $121 add-on.

Shipping, collected in a survey after the campaign, is estimated at $90 for the MC8 and $120 for the Pro to the US, and $100 and $130 to Germany, France, Spain, Italy and six other EU countries. For the countries on the campaign's shipping table, import duties and VAT are included. Pledges are charged in Hong Kong dollars.


About the Author


Jonathan, Co-Founder & Reviewer at GizmoCrowd

Jonathan

Co-Founder & Reviewer at GizmoCrowd


Jonathan is Co-Founder of GizmoCrowd and a crowdfunding strategist with over 15 years of hands-on campaign experience on Kickstarter and Indiegogo.


bottom of page