UniFormation S10 on Kickstarter: Resin 3D Printer That Washes and Dries Its Own Prints
Resin printing has a clean half and a messy half. The printer does its part alone. Then comes the rest: a plate dripping with resin, a tub of IPA, gloves, and a smell that hits the moment the lid opens. The UniFormation S10 is a resin 3D printer built to take that second half off your hands, washing and drying each print in the enclosure that made it.
UniFormation brings the S10 to Kickstarter after three generations of resin printers, from the GK1 in 2021 to the GK3 series, and it is the company's first campaign. 3D Printing Industry, 3DPrint.com and 3Dnatives have all covered the launch. The UniFormation S10 price on Kickstarter is $999.
📈 Campaign: $495,443 raised from 351 backers, goal $49,985, 36 days left
💰 Single Unit: $999 (203 of 300 left); Starter Bundle $1,099 (210 of 300 left); Best Value Pack $1,399 (419 of 500 left)
📦 Delivery: first batch scheduled for March 2027, shipping by backer number through April 2027; CE, FCC, RoHS and UKCA certification in progress.
When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.
Quick Verdict
Our verdict: 8.4/10
Who Is It For?
It is for miniature and figure painters who print resin at home. Beginners looking for a first resin 3D printer fit too, as do small studios and dental labs where post-processing is the bottleneck.
Main Strengths
Printing, washing and drying run in one enclosure, so a finished print comes out clean and dry.
An activated-carbon filtration system targets resin odor, which matters for a printer that shares a living space.
A 16K 10.1-inch mono LCD and a C5 ballscrew aim at fine detail on miniatures, jewelry and dental parts.
The print, wash and dry stages are built as separate modules, so a washing or drying fault need not stop printing.
One Fluid Hub serves up to three S10 printers, so a print shop can add machines without adding a wash station for each.
Main Limitations
The automated workflow caps a job at 800 ml of resin, and hollow models need drain holes plus a manual rinse.
Units ship only after CE, FCC, RoHS and UKCA certification is complete, so any certification delay moves delivery.
Support removal and curing stay manual, and the curing module is an optional add-on.
Is the UniFormation S10 Worth Backing?
Back it if you are the painter or small studio described above. Skip it if you already own a printer and a wash and cure station that you are happy with. The automated print, wash and dry cycle is the reason to back the UniFormation S10 on Kickstarter.
UniFormation S10 Price on Kickstarter
The UniFormation S10 price on Kickstarter is $999, against a $1,299 MSRP. The Single Unit is the tier to take: it includes the printer, a toolkit and spare films, it is limited to 300 units, and the $30 Curing Module completes the process for $1,029. Print farms can look at the Best Value Pack at $1,399, limited to 500 units, which adds the Fluid Hub and 2kg of resin.
The Single Unit with the curing add-on is the better buy. The Starter Bundle at $1,099 adds a painting tool kit and 2kg of resin for $70 more, a saving of only $16 against those items bought separately, so it pays off only if you need both. Every tier includes customs duties and VAT, except in regions the campaign says it cannot cover, and shipping for a single printer adds $80 to the US, $100 to Europe and $250 elsewhere. The LCD screen counts as a consumable, covered for six months against a year for the printer. Our 3D printer hub and HeyGears G1 series review cover other resin printers, and it is $999 on Kickstarter.
What Is the UniFormation S10 and What Problem Does It Solve?
UniFormation S10: A 16K Resin 3D Printer With Built-In Washing and Drying
The S10 is an automated resin printer: a print module, a wash module and a dry module behind a single door. A 5-inch touchscreen tilts 60 degrees, and the vat, build plate and print module come out with quick-release fittings.
The machine measures 620 x 340 x 620 mm, with a build volume of 223.03 x 125.9 x 200 mm, a 1,000 ml resin vat and a 9-liter wash tank, and it runs at 60 dB or less. UniFormation says its earlier GKtwo earned top marks from Tom's Hardware and ALL3DP, and it runs local repair centers in the US, the UK and Germany.
Why Washing and Drying Became the Problem Worth Solving in Resin Printing
A traditional resin workflow runs to eight steps, and most of them come after the printer stops: draining the plate, scraping off wet prints by hand, carrying them to an IPA wash station, repositioning them to air-dry, then cleaning the resin off the tools and the bench. As 3Dnatives pointed out, each handoff is one more chance for resin to end up on gloves, tools or the workspace.
Picture the same job with the handoffs gone: you send a file, walk away, and come back to a print already clean and dry. One miniature hobbyist quoted on the campaign starts prints before work and comes home to clean parts.
UniFormation S10 Key Features and Specs: Automated Wash and Dry, Filtration, 16K Printing and the Fluid Hub
Two Wash Cycles and a 270° Drying Rotation: From Vat to Dry Print Untouched
After the last layer, the S10 runs two automated wash cycles designed to clean most standard prints. A drainage channel in the wash lid sends excess cleaning solution back into the wash tank, helping keep it out of the resin vat. The build plate then rotates 270 degrees to expose several sides of the print to warm airflow at 35 to 45°C, from PTC ceramic heating with no exposed red-hot elements.
Advanced users can pick wash and dry modes and adjust their times per model, and longer draining helps remove residual IPA before the plate returns above the vat. UniFormation puts the cut in direct resin contact at 99% against a conventional routine. Print-only mode turns the S10 from an automated resin printer back into a plain one, with no resin volume limit.
Activated-Carbon Filtration: Lab Readings for Formaldehyde and TVOC
The S10 is enclosed, and its purification system uses internal and external activated-carbon filters, both included in the box. In UniFormation's own lab test, formaldehyde fell from 3.0 mg/m³ with the purifier off to 0.1 mg/m³ with it on, and TVOC from 9.4 to 1.5 mg/m³.
When odor matters more than convenience, a ventilation adapter printed from UniFormation's UniGalix model library replaces the back cover and connects an external exhaust hose.
16K Mono LCD and C5 Ballscrew: ±0.005 mm Repeatability and Preset Slicing
The 16K screen resolves 15,360 x 6,540 pixels, at a 14.52 x 19.25 μm pixel size, under a 405nm light source. The Z axis repeats to ±0.005 mm, pressure sensors detect foreign objects as small as 1 mm, and auto-heating handles cold rooms: UniFormation says the S10 heats up in 10 minutes even at 5°C.
UniFormation Studio, the S10's slicer, ships with presets for five resins (standard, ABS-like, wear-resistant, engineering and miniature), adds supports automatically and sends jobs to the printer remotely. In the campaign's print data, a 28mm miniature took 2h23min at 0.03mm layers.
Fluid Hub: A Two-Tank Wash Station Shared by Three S10 Printers
The Fluid Hub is an automated washing station that connects up to three S10 printers, washing two at a time while the third waits in queue. It splits the wash across two tanks, a rough wash in older IPA and a fine rinse in fresh IPA. UniFormation rates that cascade at 15% longer cleaning-solution life.
It targets high-volume studios and dental professionals: the campaign's scenario of three S10s and one hub puts IPA use at about 42 liters a month, against 50 with separate machines. The hub is a $410 add-on.
Should You Back the UniFormation S10 on Kickstarter?
The S10 is a resin 3D printer built for work that runs from miniatures and jewelry to dental parts and engineering prototypes. A print farm owner quoted on the campaign expects to take on more jobs with less manual work, and an engineer hopes to print in the morning and check the prototype in the afternoon.
UniFormation has finished tooling and run several rounds of pilot production, with first orders scheduled to ship in March 2027. Take the Single Unit. At $999 against a $1,299 MSRP, the UniFormation S10 is on Kickstarter.
FAQ about the UniFormation S10 on Kickstarter
Does the UniFormation S10 cure prints automatically?
No. The automated resin printer stops after drying: you remove the supports and cure the part yourself. UniFormation sells an optional foldable curing module, a $30 add-on also included in the Starter Bundle, which completes the job in the same machine.
How often do you replace the cleaning liquid in the UniFormation S10?
UniFormation suggests replacing it after about 20 to 30 washes in standalone mode, or around 40 to 50 cycles with the Fluid Hub. The real interval depends on model size, residual resin and the condition of the IPA.
What happens if one module of the UniFormation S10 fails?
Printing, washing and drying are built as relatively independent modules, so service can focus on the affected one. If washing or drying needs repair, printing can still run, depending on the issue.
Which slicers work with the UniFormation S10?
UniFormation Studio, the S10's own slicer, comes with resin presets, and the printer is also compatible with Chitubox and Lychee. UniFormation lists other slicers as supported without naming them.
What warranty comes with the UniFormation S10?
The S10 carries a one-year warranty from delivery, covering hardware defects including the mainboard and power supply. The LCD screen, a consumable, has a 180-day warranty, and wear parts, user error and unauthorized repairs are excluded. Backers in the EU get two years.
When will the UniFormation S10 ship?
Shipping is scheduled to start in March 2027 and run into April, in order of backer number, so earlier pledges get earlier fulfillment. Units ship only after their CE, FCC, RoHS and UKCA certifications are complete, and delivery dates vary by destination.
About the Author
Jonathan
Co-Founder & Reviewer at GizmoCrowd
Jonathan is Co-Founder of GizmoCrowd and a crowdfunding strategist with over 15 years of hands-on campaign experience on Kickstarter and Indiegogo.
Read more...
